Kambrook KFH200 User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
4 5
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Upright Fan Heater
Carefully read all instructions before operating
the Fan Heater and save for future reference.
Avoid touching heater body while it is on,
some parts of the heater are hot. When
moving the heater switch off and hold the
heater by the handles where provided.
Keep combustible materials such as drapes
and other furnishings at least 1.7 metres from
the front, sides and rear of the heater. Do not
use heater to dry your laundry.
WARNING: In order to
avoid overheating, do
not cover the heater.
Extreme caution and supervision is necessary
when this heater is used by or near children,
invalids or animals.
Important – this heater is intended for floor
use only.
Do not mount on ceiling or walls.
Do not leave heater unattended. Always
switch off the heater at the controls and at
the power outlet then unplug heater from the
power outlet when not in use.
Do not operate heater whilst asleep.
Do not operate any heater with a damaged
cord or plug, or if heater has been dropped
or damaged in any manner. Return heater
to your nearest Kambrook Service Centre
for examination, electrical or mechanical
adjustment or repair.
Do not use outdoors. This heater is not
intended for commercial use, such as
construction sites.
Do not use this heater with an external
programmer, timer or any other device that
switches the heater on automatically since
a fire risk may exist if the heater is covered or
positioned incorrectly.
This heater is not intended for use in wet or
moist locations. Do not use this heater in the
immediate surroundings of a bath, a shower
or a swimming pool. Do not immerse or allow
liquids to be spilt on heater.
This heater has hot and arcing or sparking
parts inside. Do not use in areas where
petrol, paints, aerosols, or other inflammable
substances are used or stored.
Do not operate the heater with the power
cord damaged, frayed or split, wound around
any part of the heater, or in contact with
heated surfaces of the heater.
Do not allow materials that have been in
contact with oil, petroleum based products
or drying fluids to come in contact with
the heater.
Do not run the cord under carpeting or cover
the cord with rugs, runners or the like. Arrange
cord away from traffic areas and where it will
not be tripped over.
To disconnect heater turn the control switch to
OFF. Turn off at the power outlet then remove
the plug from its outlet.
Do not insert or allow foreign objects to pass
through the inlet or outlet openings. This may
cause an electric shock, fire or damage
the heater.
To prevent a possible fire or heat damage,
allow ample space around the heater (1.7m
at front and 0.5m at the rear, top and sides)
and do not totally or partially block the air inlet
or outlets in any manner. Check the openings
from time to time for accumulated dust.
Do not touch hot surfaces.
Switch off at the control switch and power
outlet, then unplug and allow heater to cool
down before cleaning or storing.
Use this heater only as described in this
instruction manual. Any other use not
recommended by the manufacturer may
cause fire electric shock or injury and voids
all warranties.
Regularly inspect the supply cord, plug, control
settings, air inlets and outlets and main housing
for any damage in any way. Immediately cease
use of the heater and return to Kambrook or an
authorised service agent for inspection or repair.
Do not locate heater immediately below and
in front of a socket outlet when in use.
To avoid an electrical overload, it is
recommended that no other appliances are
plugged into the same circuit as your fan
heater, when it is in use.
Do not leave the fan heater unattended when
in use.
Do not operate the heater on an incline plane.
Do not move while the fan heater is switched on.
Always keep the heater clean. Follow the
cleaning instructions provided in this book.
To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this heater.
Important Safeguards For All Electrical
Appliances
Remove and safely discard all packaging
material and promotional labels before using
the appliance for the first time.
Connect only to 230V or 240V power outlet.
Fully unwind the power cord before use.
Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid, unless it
is recommended in the cleaning instructions.
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance, by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in anyway.
Return the entire appliance to the nearest
authorised Kambrook Service Centre for
examination and/or repair.
Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
This appliance is for household use only. Do not
use this appliance for other than its intended
use. Do not use in moving vehicles or boats.
Do not use outdoors. Misuse may cause injury.
The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice
Always turn the appliance to the OFF
position, switch off at the power outlet
and unplug at the power outlet when the
appliance is not in use.
Before cleaning, always turn the appliance to
the OFF position, switch off at the power outlet,
unplug at the power outlet and remove the
power cord, if detachable, from the appliance
and allow all parts to cool.
Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
Position the appliance at a minimum
distance of 20cm away from walls, curtains
and other heat or steam sensitive materials
and provide adequate space above and on
all sides for air circulation.
Page view 2
1 2 3 4 5 6

Comments to this Manuals

No comments