Kambrook KCE520 User Manual download pdf (Page 9)

9

Setting the Variable

Temperature

The variable temperature can

be used to maintain your desired

temperature.

NOTE: The variable

temperature only operates

when the heater is being used

in the Auto mode.

Press the MODE

button until the

heater is set to AUTO mode.

The LCD screen will display the default

temperature of 25°C and will ﬂash.

When the temperature is ﬂashing,

you may set the desired temperature

pressing the VARIABLE TEMPERATURE

buttons on the control panel.

To adjust the set temperature press

the

VARIABLE TEMPERATURE

button to increase the desired

temperature or press the

VARIABLE

TEMPERATURE button to decrease the

desired temperature.

The temperature can be set between

15° C and 35°C.

When the air temperature reaches

2-3°C above the set temperature,

the heater will automatically cut out,

although the fan will continue to run

for approximately 20 seconds to cool

the heater.

When the air temperature drops

below the set temperature the unit will

begin heating again.

Setting the Oscillation

The oscillation function works in all

operating modes.

Press the POWER/SWING

button

once to activate the oscillation. The

heater will begin to oscillate from side

to side.

Press the POWER/SWING

button

again to stop the heater from

oscillating.

Setting the Auto-Off Timer

The timer function works in all

operating modes, and switches the

unit off after a preset number of hours.

Press the TIMER button to activate

the timer settings. A timer symbol

will appear on the LCD screen

displaying 1 hour.

Press the TIMER

button to cycle

through the one hour increments, up

to 8 hours. The unit will then switch

itself to standby mode after the

selected number of hours has passed.

Safety Features

This heater includes an audible alarm

to warn that parts of the heater are

overheating. If the alarm sounds,

immediately turn the heater off and

inspect for any objects on or adjacent

to the heater that may cause high

temperature. DO NOT OPERATE THE

HEATER WITH THE ALARM SOUNDING.

KCE520_IB_FA.indd 9 12/10/09 12:10 PM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments