Kambrook CARBON KCF200 User Manual download pdf (Page 9)

9

Setting the Heating Mode

CAUTION: DO NOT COVER

SWING

HIGH

MODE OFF LOW

30

0 MINS

60

90

120

150

TIMER 180

ON

To control the heater, turn the MODE

dial as follows.

The Heat Setting dial has 3 modes:

OFF - Shuts off the heater

1 - Low heat setting (500W)

2 - High heat setting (1000W)

Once the heat setting has been

selected, turn the TIMER dial to the ON

position. This will activate the heater.

NOTE: The Carbon Tower Heater

will not activate while the Timer

dial is set at 0 MINS.

To switch the heater off, turn the

MODE dial to the OFF position.

NOTE: This heater features a tip-

over switch. If the heater tips

over, it will automatically switch

off. Once placed back into the

upright position, the heater will

activate again.

Setting the Auto-Off Timer

The TIMER function works in all

operating modes, and switches the

unit off after a preset number of hours.

Turn the TIMER dial to activate the

timer settings. The timer can be set for

up to 3 hours.

For setting times less than 1 hour, turn

the timer dial past the 2 hours mark,

then turn back to the desired time.

The unit will then switch itself off after

the selected time has passed.

By turning the TIMER dial to ON, this will

ensure the heater runs continuously,

and will not turn itself off.

Setting the Oscillation

The oscillation function works in all

operating modes.

Press the SWING button once to

activate. The heater will begin to

oscillate from side to side.

Press the SWING button again to stop

the heater from oscillating.

KCF200_IB_V4.indd 9 21/10/09 9:34 AM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments